Cefla
UV Profile Spray Line

Machine ID: 007791

Year Mfr:

Condition: As Taken From Service

Location: Midwest

Call For Price
Contact: Ralph Viegelmann
704-288-1904 Ext: 101
Submit an Inquiry on this product

This line has been taken out of production and is ready to be removed from the current location.

  • Belt hopper feeder
  • Denibbing unit S3S
  • Belted UV spray unit with Fluid Management.  Pumps and guns included.
  • UV Oven (Mercury Lamps)
  • Automated Cross Transfer Outfeed
Item 1:
Belt Conveyor with Letterbox
Delle Vedove Model VMN 2000/LB
  • transfer conveyor for manual loading of product into finishing system
  • in-feed hopper system accommodate stacked parts, to assist in the manual
    loading process
Item 2:
Brush Denib Sanding Machine
Delle Vedove Model Brushtech 4
      • rubber conveyor belt
      • variable adjustable speed from 20 to 50 m/min. (66 to 164 fpm)
      • adjustable upper hold-down devices
      • machine is equipped with four (4) wheel units (one (1) right, one (1) left,
        and two (2) top)
      • 900 rpm brushing speed
      • horizontal and vertical wheel unit adjustment by means of slide
      • equipped with a dust extraction hood for each brushOptions included: drive system of each brush is upgraded with variable speed capabilities (300 to 1200 rpm)
Item 3:
In-Line Ultra Violet Spray Machine (MS # 10223 – Stock)
Cefla Model NW4
  • provides automatic three side application of ultra violet material to work piece
  • photo-eye sensor activates intermittent spraying operation to improve transfer efficiency
  • each spray gun is independently controlled and set-up (one (1) air circuit for each gun), enabling full application flexibility
  • intake air filtered by dry air filters to minimize dust contamination
  • overspray recovery and exhaust air/coating separation system designed to
    retard emission of U.V. material to outside atmosphere
  • stainless steel overspray collection and recovery tank easily removed for
    cleaning purposes
  • transport system includes an in-feed and out-feed conveyor belts and
    powered fixed position rollers through the application chamber
  • fixed positions rollers through application chamber are removable for ease
    of cleaning
  • variable conveying transport speed
Item 4:
Ultraviolet Curing System for Profiles (MS # 10224 – Stock)
Cefla Model TLFP 3/100/2 INF
    • provides direct emission of UV radiation, which is utilized in the curing of UV-cured coating materials
    • three (3) high-intensity Ultraviolet curing lamps for top side curing
    • two (2) lower mounted UV curing lamp with fixed power of 100 W/cm,
      250 mm long, placed crosswise
    • UV lamp power supply is infinitely variable from 80 to 120 W/cm (200 to
      300 watts/in) and is manually set and displayed at the control board
    • UV lamps are equipped with shutters and half-power switching to close
      irradiation zone in the event of line stoppage
    • lamps and conveyor area cooled by filtered air flow
    • chrome bar conveyor with variable speed drive has infeed and outfeed
      roller sections
Item 5:
Semi-Automated Unload Unit
Delle Vedove Model TR-OUT
  • unit designed to semi-automatically unload linear profile work pieces
  • three (3) transfer arms support a range of work piece lengths
  • belt feed section with variable speed drive
  • unloading arms with PVC coated belts

Manufacturer Cefla
Model UV Profile Spray Line
Year
Machine Location Midwest