Weber
53" 4-Head Sander & Orbital Sander

Machine ID: 007775

Year Mfr: 2008

Condition: Good Condition

Location: Midwest

Contact: Ralph Viegelmann
704-288-1904 Ext: 101
Submit an Inquiry on this product

This line has been removed from service and is ready to be shipped.
Manufacturer pecs (to be confirmed):

Wide Belt Sander with three top stations; for high-quality orbital sandingModel: WEBER KSF 3 – 1350 COO
In the following configuration:
Sanding Heads
Cross Belt Station, (heads 1) with:
  • Separate lamella belt with pneumatic tensioning
  • Electronically (PLC) controlled platen with patented ISA-System 22/44 (44mm wide
    segments)
    Dual motion pad orbital, (head 2) with:
    • Dual eccentric drives for finishing of pre-sanded surfaces
    • Variable speed drives
    • Quick abrasive pad tensioning
    • One operating pad and one spare pad supplied
    • 4mm pressure adjustment via hand wheel
      Dual motion pad orbital, (head 3) with:
    • Dual eccentric drives for finishing of pre-sanded surfaces
    • Variable speed drives
    • Quick abrasive pad tensioning
    • One operating pad and one spare pad supplied
    • 2.5mm pressure adjustment via hand wheelWork Piece Cleaning
• ES Blow Off
Machine Features:
  • Adjustment and control of all electrical functions (parameters) via color touch screen (Siemens MP 277)
  • Program memory for 99 programs, alpha-numerical display
  • All fault messages shown in easy to understand text
  • All operating functions in easy to understand text
  • Machine thickness set up by KSF 4
    Conveyor:
    • High quality conveyor belts made of natural rubber
    • Variable speed, 2-14m/min (6 to 46 FPM), selected at the control panel
    • High efficiency vacuum
• Variable Speed Drive
• Work piece controlled sanding belt blow off
• Vacuum conveyor with blower mounted in machine,5.5 kW drive
• Tampico conveyor cleaning brush, driven
• Heavy duty rubber covered pinch rolls mounted in ball bearings
Safety gate/oversized part sensor, if activated:
  • Stops conveyor feed
  • Opens table
    Technical Data:
    Operating width:
    Cross Belt
    Drives heads 2 & 3, frequency controlled:
    Drive, feed:
    Drive height adjustment:
    Panel thickness (min./max.):
    Pass-line (constant):
    Feed speed (variable):
    Operating voltage:
    Control voltage:
    Wiring:
    Painting: RAL 9002 white (structure) as well as in feed and out feed table RAL 3001 red doors, Weber grey
    Safety equipment according to EC-guideline
    optimal air/dust collection to observe the TRK-values, dust-proof
    UL Wiring
page2image39118208
1350 mm 11.0 kW 3.0 kW 4.4 kW 3.9 kW 0.75 kW
53”
15 HP
4 HP 5.75 HP 5 HP
1 HP .160”-5.5” 35.5” 6-45 FPM
4-140 mm
900 mm
2-14 m/min
460 V/3PH/60Hz
24V DC accordingto VDE/IEC-guidelines

Manufacturer Weber
Model 53" 4-Head Sander & Orbital Sander
Year 2008
Machine Location Midwest