Dimter
Dimter Opticut 350-4

Machine ID: 007346

Year Mfr:

Condition: As Taken From Service

Location: Midwest

Voltage: 480V, 60Hz, 3Ph

Contact: Ralph Viegelmann
704-288-1904 Ext: 101
Submit an Inquiry on this product

  • Infeed
  • 60' Outfeed belt with (7) sorting stations
  • Dismantled and loaded on the truck

Lumber dimensions to be machined:

Ingoing lengths min./max. 1 5/8’ – 17’5” (500 - 5300 mm)

Ingoing widths min./max. 1 1/5” – 1’ (30 – 300 mm)

Ingoing thicknesses min./max. ½” – 4 4/5” (12 - 120 mm)

Lumber cross sections max. 1’ x 1 3/5” (300 x 40 mm)

max. 8” x 4 4/5” (200 x 120 mm)

Fixed length after saw min. 7” (180 mm)

Finger jointing length after saw min. 6” (150 mm)

Cutting tolerance +/- 1/32” – 1/16” (at a timber quality with a minimum share of resin and a plane surface.

min. tolerance for fixed lengths up to 3 ¼’

max. tolerance for fixed lengths up to 8 1/5’)

Bend of the boards in all directions max. 2/5” per 3 ¼’ length

Thickness tolerance +/- 2/16” (+/- 3 mm)

Lumber species Soft-/Hardwood

Capacity:

Feed speed at saw,

infinitely variable up to 790’ / min. (240 m/min.)

Per cutting cycle 0.6 – 1.0 sec.

Working height 55’’ (1400 mm)

Connected loads:

Electric connected load approx. 18 kW

Operating voltage 480 Volt / 60 Hz (C/s)

Voltage variations max. 5 %

Air consumption approx. 1200 NL/min.

Service pressure approx. 8 bar

Exhaust speed approx. 100’ /sec.

Basic color Grey RAL 7032 and Blue RAL NCS 5030-R 80 B

 

Item 1 Length measuring station with fluorescent camera for 3 grades

Item 2 Shortened conveyor belt to cross-cut saw, length 12’ 3 4/5’ (3750 mm)

Item 3 Optimizing cross-cut saw, type OptiCut 350-4 with built-in waste pit.

Graphical input terminal

1 / 4 VGA-display, with numerical block and function keys, with software package OptiCom for control of the line.

At disposal for processing:

16 product groups,

8 grades,

800 fixed lengths,

max. 200 fixed lengths per product group,

production statistics

Item 5 Equipment with left stop edge

Item 6 Equipment for big cross-sections, for timber widths of more than 9’’ (230 mm), for timber thicknesses of more than 4’’ (100 mm),

max. cross-section 1’ x 1 3/5’’ (300 x 40 mm)

resp. 8’’ x 4 4/5’’ (200 x 120 mm)

with double feed rollers,

changed saw arm geometry sawblade diameter 1 5/8’’

(500 mm), speed max. 3600 rpm

Manufacturer Dimter
Model Dimter Opticut 350-4
Year
Voltage 480V, 60Hz, 3Ph
Machine Location Midwest