Brandt
KD 67C

Machine ID: 007218

Year Mfr: 2000

Condition: As Taken From Service

Location: Tennessee

Voltage: 230V, 60Hz, 3Ph

Call For Price
Contact: Ralph Viegelmann
704-288-1904 Ext: 101
Submit an Inquiry on this product

This machine is still under power and available for inspection.
Brandt Automatic Edgebander, Optimat Model KD-67 C

PC-16 Program Control
- Color matrix LCD screen display
- 8mb RAM
- Manual push button controls or program control operation
Equipped with digital height indicator.
Integrated electronic line control system for increased reliability and diagnostic assistance. No limit switches used for setting operating units.
Control panel located at machine infeed for operator convenience.
Universal automatic magazine for strip and coil feeding.
Large coil table (800 mm diameter) to accommodate large coils of 3 mm PVC.
Hot melt granulate glue application system with twelve minute heat-up time.
Quick-change glue tank for easy maintenance and glue color change, if necessary.
Reversible rotation of glue application roller. Retractable glue roller.
Strengthened precutter for cutting PVC (max. 3 x 45 mm) from the coil.
Infrared radiant quartz heating unit between glue roller and pressure zone for optimum gluing strength.
First pressure roller driven and two idle pressure rollers.
Double motor end trimming unit with straight and chamfer capability. Chamfer up to 15ï‚°. Program controlled indexing from straight to bevel end trimming.
Fine trimming unit with digital “Quickset” system. Tilt range 0 - 15. Program controlled indexing.
Contour trimming unit for profile corner trimming.
Sound enclosure with centralized dust extraction outlet.
Scraping unit for rigid PVC edges. Program controlled indexing.
Buffing unit.
Electronic frequency changer for all trimming motors which also incorporates electronic motor brakes.
Electrical components according to UL/CSA Listings.

Technical Specifications

Edgeband thickness 0.4 – 8 mm (0.016" - 5/16” )
Coil cutoff maximum 0.8 x 45 mm
3.0 x 45 mm (PVC)
Edgeband height 12 - 45 mm (1/2" – 1 ¾ ")
Panel length min. 160 mm (6 3/8")
Panel width min. 65 mm (2 3/8")
Panel thickness
- min. 8 mm (5/16")
- max. 40 mm (1 3/4")
Feed speed 11 m/min (36 FPM)
Feed motor 2.2 kw (3 HP)
Pressure section First roller driven, two rollers idle
End trim unit - two motors .27 kw (1/3 HP ea)
Cutting speed 12,000 RPM
Straight cut max. 5 x 45 mm (3/16" x 1 3/4")
Fine trimming unit .4 kw (1/2 HP ea)
Tilting range 0 - 15ï‚°
Cutter speed 12,000 RPM
Profile trimming unit - top and bottom 0.3 kw (1/2 HP ea - two motors)
Electronic frequency changer
Total power required 7 kw
Amperage @ 230 - 25 amps
@ 460 - 12.5 amps
Machine length 5240 mm (17' 2”)
Machine width 1730 mm (68")
Working height 900 mm (35.5")
Total height 1600 mm (63")
Machine net weight (with all stations full) 1950 kg (4290 lbs)

Manufacturer Brandt
Model KD 67C
Year 2000
Voltage 230V, 60Hz, 3Ph
Machine Location Tennessee