Brandt
KDN 540

Machine ID: 006984

Year Mfr: 2004

Condition: As Taken From Service

Location: Midwest

Contact: Ralph Viegelmann
704-288-1904 Ext: 101
Submit an Inquiry on this product

This system was removed by a technician and is available for immediate delivery.
Specs (to be confirmed):

  • Brandt Edge Bander - Brandt KDN-540-2C Servo Edge Bander
  • 0.4 - 8 mm (1/64" - 5/16") Edge capacity, Panel thickness 12 - 55 mm (1/2" - 2-3/16"), Minimum panel length 160 mm (6-3/8") and 65 mm (2-1/2") minimum width
  • Equipped with Integrated Line control - No limit switches used for setting workstation function
  • Open Station for Joint Trimming Unit for pre-trimming of the workpiece prior to gluing
  • Universal Automatic Magazine for Strip and Coil Feeding with strengthened precutter for cutting PVC from the coil - 800 mm Diameter coil table for large 3 mm PVC coils
  • Glue Station - Quick heat up Granulate Gluing System, includes reversible rotation of glue application roller; Pressure Section with (1) large driven pressure roller and (2) secondary roller with controlled side pressure
  • Double Motor End trim Station - Straight-Chamfer 0 to 15° - (2) 1/4 HP - 12,000 RPM motors; program controlled indexing from straight to bevel end trimming
  • Flush Trimming Unit - (2) 3/4 HP - 12,000 RPM motors with 2-Position Vertical Positioning
  • Fine Trimming Station - (2) 3/4 HP - 12,000 RPM motors; Servo Motor Program controlled indexing
  • Contour Trimming Unit - (1) ½ HP - 12,000 RPM motor; For corner rounding of thick PVC Edges
  • Scraping Station with Knives - For scraping of roughly trimmed PVC edges in order to remove cutter marks; program controlled pneumatic indexing
  • Top & bottom buffing Station - inclinable vertically and horizontally
  • Feed chain track speed - (2) Speeds: 36 FPM when contour trimming, otherwise 46 FPM; 3 HP feed drive
  • Equipped with digital height indicator, Electronic Frequency Changer for all trimming motors

Manufacturer Brandt
Model KDN 540
Year 2004
Machine Location Midwest