Schultz Tool Veneer Bladder Membrane Press

Schultz Tool Veneer Bladder Membrane Press

Seller’s Soecification:

• Veneer Membrane Press
• Approx. 55″x106″ press capacity
• Hot air design w/ 3mm silicone membrane
• Specification –
• Typical cycle time of 3 min. using proper glue that sets at 200° F
• Can use PVA, but extends cycle time to approx. 15-45 min. depending on glue mix to achieve 80%+ cure strength
• All mechanical components operational
• Needs 4 to 5 heating rods replaced.
• We have replacements but do not have the ability to replace them
• Current operational temperature is 150°