Rosenquist EG 800A RF Glue Table

Manufacturer’s

Specification

Model EG800A 

ELECTRO GLUE RADIO FREQUENCY EDGE GLUER

Feeds Left to Right

Curing Area: 36” deep by 96” long.

Clamping Capacity: 41” deep by 96” long by 2” thick.

Side Pressure::Applied by (16) 5” bore by 12” stroke air cylinders on 6” centers. Cylinders are NFPA Standard “Parker” Cylinders

Top Pressure: Applied by (4) 3 1/4” bore by 18” stroke air cylinders. Cylinders are NFPA Standard “Parker” Cylinders

Generator:  A built in 30 kW. Radio Frequency generator cures approximately 3,000 square inches of glue line per minute. The generator is completely enclosed in aluminum housing. The generator also features a vacuum variable for improved efficiency and performance.  

Operators Control Panel: Includes adjustable cycle timer, necessary meters, indicator lights, control pushbuttons and a two hand, no-tie-down control system for closing the press.

System Controls: The system is controlled by an Allen Bradley PLC. The system is equipped with a rotary disconnect that is mounted on the electrical panel access door. All PLC outputs and branch circuits are fuse protected.  

Safety: An electronic eye prevents closing of the press in the event any objects are inserted from the front.  All access doors are interlocked to prevent use of the generator in the event any are open.  A safety switch is used to prevent the use of the generator when the press is in the open position.

Voltage:  

Installation: Quoted price includes the services of a Rosenquist technician to assist with the installation of the equipment and training of production and maintenance personnel. Included are all travel and living expenses. 

Delivery: Currently 12-14 Weeks

INCLUDED OPTIONS

Smart Cure: This feature utilizes the capabilities of the plc to monitor the cure rate of the adhesive and will automatically end the cure cycle once the adhesive is set. This will eliminate the need for the operator to calculate the amount of glue line and manually setting the RF cycle timer. The system is also equipped with the standard cycle timer. 

​​​​​​​​​

Automatic Power Control: Eliminates the need to adjust the power control manually.  Eliminates human error associated with incorrect power settings.  Slightly faster cure cycles will be realized. 

Recipe Control: This feature allows a specific recipe for a particular species or product to be stored in the PLC. The recipe control system will automatically set the “Edge Pressure”, “Smart Cure Settings”, Dwell Time” & “Power Level” for each recipe. A recipe is recalled by depressing one of the illuminated pushbutton located at the operators control console.   

Powered In-feed Table:  provides a convenient workspace for the operator to compose a set of panels while the press is closed. Pusher is powered by an electric motor that is controlled by an inverter drive. Includes all necessary push buttons and controls.

Out-Feed Table: A metal table mounted on the same angle as the press with an area of 96” long x 42” wide.  

​​​​​​