Weinig Powermat 1500 Moulder
Specifications
Manufacturer | Weinig |
Model | Powermat 1500 Moulder |
Stock Number | 009725 |
Description
Weinig Powermat 1500
The machine is fully cnc controlled(axial and radial), vfd controlled motors, and powerlock except for the first bottom head. It is also a 12,000rpm machine on heads 2-6, 8000rpm on the first bottom.
Some powerlock heads would be included with the sale, and other things like duct work, etc. can be discussed about for an additional cost.
Optional: An entire knife making cell could be for sale for an additional cost, if the moulder were to sell consisting of a Weinig R 960 powerlock(with options for processing carbide and other things), Weinig Opticontrol Digital tool measuring system with tool room link, and possibly a trotec laser system with filtration unit(for making knife templates, etc.).
Full specification of moulder below:
FLA 214 at 460V
Main fuse 250amps
Total connected load 128KW
Remote Lock out / Tag out
Switch cabinet and operating panel separate from machine
Cooling device for switch cabinet
Straightening table, 2 m long
Automatic Waxilit pump
Working width 230 mm x 160mm High
Feed roller in front of 1st bottom spindle pneumatic "up-down"
FEED SYSTEM: Motor 7 KW (9.5 HP)/ 5 - 40 m/min
CNC-controlled adjustment and positioning of feed up/down
Lateral pressure roller at the infeed table, spring-mounted
FIRST BOTTOM: Motor 11 KW (15 HP) / 1 13/16" / 8000 rpm
WITHOUT rebate facility and WITHOUT rebate cutter / Digital manual radial adjustment
RIGHT VERT: Motor 11 KW (15 HP) / PLock / 4000- 12000rpm
Pressure roller from above, pivoting, spring loaded
Axial / Radial CNC-controlled adjustment and positioning
LEFT VERT: Motor 11 KW (15 HP) / PLock / 4000- 12000rpm
Vario hood (2 axes)
Pressure shoe in front, 2 lateral pressure rollers, spring-mounted
150 mm pendulum arbor extension
Pressure roller from above, pivoting, spring loaded
Axial / Radial CNC-controlled adjustment and positioning
FIRST TOP: Motor 22 KW (30 HP) / PowerLock / 4000- 12000 rpm
Vario Hood (2 axes)
Axial / Radial CNC-controlled adjustment and positioning
Prepared for cassette system
SECOND TOP: Motor 30 KW (40 HP) / PLock / 4000- 12000rpm
Vario hood (2 axes)
Axial / Radial CNC-controlled adjustment and positioning
Prepared for cassette system
LAST BOTTOM: Motor 22 KW (30 HP) / PLock / 4000- 12000 rpm
Axial / Radial CNC-controlled adjustment and positioning