Complete Operation Sawmill
Sold
Specifications
| Manufacturer | Complete Operation |
| Model | Sawmill |
| Stock Number | 008573 |
Description
The seller has confirmed that this whole operation was in good working/running condition when pulled from service. It is all packaged and ready to load!
- Morgan Sharp chain scragg mill
- 40" circular insert tooth saws w/ 125HP electric motor w/ soft start and hydraulic drive
- Hydraulic log step feeder
- (3) saw chain feed trim saw
- 7HP on each saw
- 2HP drive
- Cornell double arbor Gangsaw: 75HP bottom motor
- Pineapple feed w/ infeed and outfeed powered rollers
- Baker Bandsaw resaw
- 4 cut
- (2) 40HP electric motors
- Timberland sidewinder board deduster
- 30' (2) strand log deck
- Lots of extra parts and saw blades included
- No take away belts. Slabs drop on to a crossover belt.
- It's NOT the mini scragg. It has 40" saws and machine is over 20' long x 8' wide, per seller
- Double Arbor
This is currently set up for short logs, but if you remove the hold down wheels that he placed on there, you will be able to take a log up to 12'.
This would be a great setup for a small diameter log (4" to 12") averaging a log every 5-6 seconds. These folks were averaging 14,000 bdft per shift sawing 5/8 deck boards with a crew of (5).
- Morgan Sharp chain scragg mill
- 40" circular insert tooth saws w/ 125HP electric motor w/ soft start and hydraulic drive
- Hydraulic log step feeder
- (3) saw chain feed trim saw
- 7HP on each saw
- 2HP drive
- Cornell double arbor Gangsaw: 75HP bottom motor
- Pineapple feed w/ infeed and outfeed powered rollers
- Baker Bandsaw resaw
- 4 cut
- (2) 40HP electric motors
- Timberland sidewinder board deduster
- 30' (2) strand log deck
- Lots of extra parts and saw blades included
- No take away belts. Slabs drop on to a crossover belt.
- It's NOT the mini scragg. It has 40" saws and machine is over 20' long x 8' wide, per seller
- Double Arbor
This is currently set up for short logs, but if you remove the hold down wheels that he placed on there, you will be able to take a log up to 12'.
This would be a great setup for a small diameter log (4" to 12") averaging a log every 5-6 seconds. These folks were averaging 14,000 bdft per shift sawing 5/8 deck boards with a crew of (5).