Cefla UV Profile Spray Line

This line has been taken out of production and is ready to be removed from the current location.
Belt hopper feeder
Denibbing unit S3S
Belted UV spray unit with Fluid Management.  Pumps and guns included.
UV Oven (Mercury Lamps)
Automated Cross Transfer Outfeed
Item 1
Belt Conveyor with Letterbox
Delle Vedove Model VMN 2000/LB
transfer conveyor for manual loading of product into finishing system
in-feed hopper system accommodate stacked parts, to assist in the manual
loading process
Item 2
Brush Denib Sanding Machine
Delle Vedove Model Brushtech 4
rubber conveyor belt
variable adjustable speed from 20 to 50 m/min. (66 to 164 fpm)
adjustable upper hold-down devices
machine is equipped with four (4) wheel units (one (1) right, one (1) left,
and two (2) top)
900 rpm brushing speed
horizontal and vertical wheel unit adjustment by means of slide
equipped with a dust extraction hood for each brushOptions included drive system of each brush is upgraded with variable speed capabilities (300 to 1200 rpm)
Item 3
In-Line Ultra Violet Spray Machine (MS # 10223 – Stock)
Cefla Model NW4
provides automatic three side application of ultra violet material to work piece
photo-eye sensor activates intermittent spraying operation to improve transfer efficiency
each spray gun is independently controlled and set-up (one (1) air circuit for each gun), enabling full application flexibility
intake air filtered by dry air filters to minimize dust contamination
overspray recovery and exhaust air/coating separation system designed to
retard emission of U.V. material to outside atmosphere
stainless steel overspray collection and recovery tank easily removed for
cleaning purposes
transport system includes an in-feed and out-feed conveyor belts and
powered fixed position rollers through the application chamber
fixed positions rollers through application chamber are removable for ease
of cleaning
variable conveying transport speed
Item 4
Ultraviolet Curing System for Profiles (MS # 10224 – Stock)
Cefla Model TLFP 3/100/2 INF
provides direct emission of UV radiation, which is utilized in the curing of UV-cured coating materials
three (3) high-intensity Ultraviolet curing lamps for top side curing
two (2) lower mounted UV curing lamp with fixed power of 100 W/cm,
250 mm long, placed crosswise
UV lamp power supply is infinitely variable from 80 to 120 W/cm (200 to
300 watts/in) and is manually set and displayed at the control board
UV lamps are equipped with shutters and half-power switching to close
irradiation zone in the event of line stoppage
lamps and conveyor area cooled by filtered air flow
chrome bar conveyor with variable speed drive has infeed and outfeed
roller sections
Item 5
Semi-Automated Unload Unit
Delle Vedove Model TR-OUT
unit designed to semi-automatically unload linear profile work pieces
three (3) transfer arms support a range of work piece lengths
belt feed section with variable speed drive
unloading arms with PVC coated belts