Weinig
Unimat Gold

Machine ID: 007332

Year Mfr: 2013

Condition: Good Condition

Location: Northeast

Voltage: 460V, 60Hz, 3Ph

Contact: Ralph Viegelmann
704-288-1904 Ext: 101
Submit an Inquiry on this product

This machine is not longer needed at the current location.  Low hour machine that was only run for about a year.

Manufacturer spec sheet:

Weinig Automatic Planer and Moulder Unimat Gold 002 Spindle Arrangement No. 002 With UL Standard Bottom-Right- Left –Top- Top- Bottom
Technical Data:
Working width (with tool cutting circle 125mm) 20-230mm Working height (with tool cutting circle 125mm) 8-120mm First Horizontal Bottom Spindle
Diameter 1 13/16′′
Speed 6000RPM
Tool Cutting circle 125-145mm
Setting range axial 5mm
Table insert, hardened and chromium-plated, in front of 1st bottom spindle Motor with electronic brake 7.5KW (10HP)
First Right Vertical Spindle
Diameter 1 13/16′′
Speed 6000RPM
Tool Cutting circle 100-200mm
Max. tool diameter behind fence level 180mm
Maximum profile depth 35mm
Setting range axial 40mm
Motor with electronic brake 7.5KW (10HP)
First Left Vertical Spindle
Diameter 1 13/16′′
Speed 6000RPM
Tool Cutting circle 100-200mm
Maximum profile depth 35mm
Setting range axial 40mm
Motor with electronic brake 7.5KW (10HP)
First Horizontal Top Spindle
Diameter 1 13/16′′
Speed 6000RPM
Tool cutting circle 112-200mm
Tool cutting circle for planer heads max. 180mm
Maximum profile depth 35mm
Setting range axial 40mm
Split pressure shoe in front of top spindle, adjustable to tool cutting circle and receding from the tool, spring –mounted.
Motor with electronic brake 11KW (15HP) Second Horizontal Top Spindle
Diameter 1 13/16′′
Speed 6000RPM
Tool cutting circle 112-200mm
Tool cutting circle for planer heads max. 180mm
Maximum profile depth 35mm
Setting range axial 40mm
Split pressure shoe in front of top spindle, adjustable to tool cutting circle and receding from the tool, spring –mounted.
Motor with electronic brake 15KW (20HP) Second Horizontal Bottom SpindleDiameter 1 13/16′′
Speed 6000RPM
Tool Cutting circle 112-200mm
Maximum profile depth 15mm
Setting range axial 35mm
Motor with electronic brake 7.5KW( 10HP) Spindles in General
All moulding spindles dynamically balanced for highly concentric running4 sets of spacer collars, clamping height 170mm, diameter 1 13/16′′
2 additional sets of spacer collars, clamping height 170mm, diameter 1 13/16′′Feed system
Frequent-controlled feed system, infinitely variable 6-30m/min.
Durofer pointed tooth rollers ( Weinig patent) self –cleaning with depth limitation Motor 4KW (5.5 HP)
Machine Electric
6 Operational voltage(single) 460volt, 60 cycles according to UL regulations.
Machine Base, Tables and Fences
Straightening table, 2m long ( incl. Edge jointing fence)
One driven steel roller in the outfeed table, spring- mounted 50mm width
One driven steel roller in the machine table, hardened and spring-mounted 150mm width Exchangeable table plates for the entire machine
Machine table chromium-plated
Manual waxilit pump for removing resin from machine table.
Pressure Elements and Guides
Two Lateral pressure rollers in front of left spindle revolving and Spring-mounted
Lateral pressure roller at the infeed table, spring- mounted
Pressure rollers from above, spring mounted
2 Pressure Pads 87mm long
2 extra sets of chipbreaker shoes (66mm) for top spindle
Straight edge
Machine Operation
Both axes of all spindles – with the exception of the 1st
bottom spindle – are equipped with mechanical displays
Pressure shoe before and after top spindles with mechanical displays.
“Digiset” (digital double read-out) for left and top spindles (see tool radius-read timber measure). Central lubrication, lubrication points for axial spindle adjustment.
Safety and Noise Protection
Easily liftable safety hood with window covers the entire
Work area ( feed and spindles) and protects against mechanical hazards.
When the safety hood is lifted, spindles and feed are automatically switched off. The safety enclosure cannot be opened during automatic operation
Machine is supplied according to UL regulations (in the single market)!
One interior light in the safety hood
Electromagnetic interlocking of the safety hood (the hood may be opened only after the standstill of the spindles, approx. 15 seconds)

Manufacturer Weinig
Model Unimat Gold
Year 2013
Voltage 460V, 60Hz, 3Ph
Machine Location Northeast