Homag
BAZ 322/60/AP

Machine ID: 006990

Year Mfr: 2012

Condition: Good Condition

Location: Europe

Call For Price
Contact: Ralph Viegelmann
704-288-1904 Ext: 101
Submit an Inquiry on this product

HOMAG Profiline BAZ 322/60/AP with Automatic Table and Pod setup!
This system was used for less than 1-year of use and is available for immediate delivery.
Panel Parameters

LENGTH:
- Single Table Length Processing: 6,000 mm using all units
- Single Table Length Processing: 6,175 mm routing / 25 mm dia tool
- Pendulum Length Processing: 2,375 mm using all units
- Pendulum Length Processing: 2,550 mm routing / 25 mm dia tool

WIDTH:
- Front Stop: 40 mm Panel thick: 1,525 mm all units / 25 mm dia tool.
- Front Stop: 60 mm Panel thickness: 1,450
- Using Back Stop: All Panel thickness: 1,700 mm all units
- Using Back Stop: With 25 mm dial tool 1,850 mm
- Using Back Stop: With gluing 1,775 mm

Traveling way Z-axis = 600 mm
- enables use of long tools also in case of high panels

Traveling speeds:
- vector speed: 113 m/min
- X and Y axis: 80 m/min
- Z-axis: 30 m/min

Panel Thickness when Routing AND Banding:
- MAX: 60 mm
- MIN: 12 mm when trimming Chamfer only
- MIN: 16 mm when trimming radius or 2x radius PLUS 10 mm

TABLE:
- 10 Automatic Positioning Rails
- Automatic Positioning Vacuum Pods
- 6 Stops in Back
- 6 Lifting rails
- 2 Stops in Lateral / Position 1 on LEFT
- 2 Stops in Lateral / Position 2 on RIGHT
- PLUS 2 Mirrored Stops on RIGHT


GLUING HEAD:
- Power Edge Unit for EVA
- Hot Air Nozzle for Gluing Unit
- Pre-Snipping station AND 2-fold coil holder

CONTROL:
- PC 85 with woodWOP
- WoodSCOUT
- WoodTIME (Must register with HOMAG to activate license for seats)
- WoodWOP Package BAZ (Must register with HOMAG to activate license for seats)

CHIP CONVEYOR BELT B300:
- Conveyor Height 410 mm

WORKING UNITS:
- Main Spindle: 15 kW with C-Axis Interface
- 12 Automatic tool changer
- Boring head: 17 Vertical spindles
- 4 Horizontal spindles WITH Saw (0 - 90 Degrees)
- ADD ON Trimming spindle for boring head (80 mm retraction stroke)
- Saw/Snipping Aggregate
- Edge Blow off nozzle
- Lock case trimming unit (2 spindles)
- Flex5 PLUS: Sawing/trimming/drilling aggregate
- Extension C-Axis for Flex5 PLUS
- Tool Changer for Flex5 PLUS units
- COMBI Flush trim/scrape aggregate for up to 60 mm with 1mm cutters
- Profile Knife Scrape: R1 to R4
- 6 HSK63 Tool Chuck

Manufacturer Homag
Model BAZ 322/60/AP
Year 2012
Machine Location Europe